EI30 series
0.7VA-EI30-5.5
0.7 VA · EI30 core · Standard (0) · 230 V primary · 14 part numbers
This series has been withdrawn from the current catalog
The 0.7VA-EI30-5.5 datasheet is no longer part of pcb mount transformers production and these part numbers cannot be ordered. The page and the drawing stay published for anyone maintaining a design that already uses one — open a part number below to see the active parts it can be requoted against.
Send the specification and we will quote the same wind as a custom build.
Series specifications
- Core
- EI30
- Rated power
- 0.7 VA
- Primary
- 230 V (single winding)
- Secondary
- 6–24 V per winding · single or dual
- Winding code
- 5.5
- Cover style
- Standard (0)
- Copper weight
- 10 g
- Total weight
- 46 g
- Pin configuration
- 1-5 / 7-9 · 1-5 / 6-7 + 9-10
- Certifications
- EN 61558
- Part numbers
- 14 on this datasheet
Insulation and impregnation are specified as air, oven-dried varnish, polyurethane coating, or epoxy potting, selected to the unit's environmental exposure and required creepage and clearance.
Datasheet
Archive copyFactory datasheet for the withdrawn 0.7VA-EI30-5.5 series, kept here for anyone maintaining a design that already uses one. PDF, opens in a new tab.
0.7VA-EI30-5.5.pdf
Part numbers in this series
Core, rating, cover, and footprint are fixed by the datasheet above. These 14 part numbers differ only in the secondary winding.
14 rows
| ASL101506 | 6 V | 117 | 9.8 V | 1-5 / 7-9 |
|---|---|---|---|---|
| ASL101508 | 7.5 V | 93 | 12.2 V | 1-5 / 7-9 |
| ASL101509 | 9 V | 77.7 | 14.5 V | 1-5 / 7-9 |
| ASL101512 | 12 V | 58.3 | 19.4 V | 1-5 / 7-9 |
| ASL101515 | 15 V | 46.6 | 22.8 V | 1-5 / 7-9 |
| ASL101518 | 18 V | 38.8 | 29.6 V | 1-5 / 7-9 |
| ASL101524 | 24 V | 29.2 | 36.4 V | 1-5 / 7-9 |
| ASL101606 | 2 × 6 V | 58.3 | 9.4 V | 1-5 / 6-7 + 9-10 |
| ASL101608 | 2 × 7.5 V | 46.5 | 12.2 V | 1-5 / 6-7 + 9-10 |
| ASL101609 | 2 × 9 V | 38.8 | 13.9 V | 1-5 / 6-7 + 9-10 |
| ASL101612 | 2 × 12 V | 29.2 | 18.6 V | 1-5 / 6-7 + 9-10 |
| ASL101615 | 2 × 15 V | 23.3 | 22.89 V | 1-5 / 6-7 + 9-10 |
| ASL101618 | 2 × 18 V | 19.4 | 28 V | 1-5 / 6-7 + 9-10 |
| ASL101624 | 2 × 24 V | 14.6 | 37 V | 1-5 / 6-7 + 9-10 |
Current is quoted per secondary winding, so a dual-winding part delivers the listed current on each of its two windings rather than splitting it between them. No-load voltage is the open-circuit secondary before the winding is loaded — expect it to sit above the rated figure.
Next step
Still using this series?
The wind still exists as a specification even though the part number has gone. Send it over and we will price the same transformer as a custom build.