PCB Mount Transformers
ASL160118BO
10 VA · EI48 · 230 V primary · 18 V secondary at 555 mA
Specifications
- Part number
- ASL160118BO
- Availability
- Current catalog
- Rated power
- 10 VA
- Primary voltage
- 230 V
- Secondary voltage
- 18 V
- Secondary current
- 555 mA
- No-load voltage
- 22.6 V
- Core
- EI48
- Cover style
- BO
- Pin spacing
- 27.5 mm
- Pin configuration
- 1-6 / 8-11
- Mounting
- PCB through-hole
- Copper weight
- 50 g
- Total weight
- 275 g
- Certifications
- EN 61558
- Series
- 10VA-EI48-16.8-BO
Insulation and impregnation are specified as air, oven-dried varnish, polyurethane coating, or epoxy potting, selected to the unit's environmental exposure and required creepage and clearance.
How this part is supplied
Aslan Elektronik builds to order and ships direct from the factory. S&B Tech is its exclusive North American representative, not a stocking distributor, so pricing comes back with the quote at your volume. Lead time is two weeks.
A secondary voltage, cover style, or footprint outside this table is a custom wind, which is normal business here rather than an exception.
Both arrive with ASL160118BO attached. We reply within 48 hours.
Datasheet
Factory datasheet for the 10VA-EI48-16.8-BO series — dimensions, winding table, and pin layout for every part number on this page. PDF, opens in a new tab.
10VA-EI48-16.8-BO.pdf
Parts this replaces
Catalog parts ASL160118BO matches on winding topology, secondary voltage, current, and VA rating.
Obsolete parts ASL160118BO can replace
3 parts no longer listed by DigiKey. If one of these is on your bill of materials, this is the winding that takes its place — built to order, so the quantity you need is the quantity we run.
| Part number | Manufacturer | Match |
|---|---|---|
| BV048-5199.0 | Pulse Electronics | Grade A |
| BV048-5385.0 | Pulse Electronics | Grade A |
| BV042-5199.0 | Pulse Electronics | Grade B |
How to read this table
- Grade A:
- Same winding topology, secondary voltage within 2%, and rated at or just above the part it replaces.
- Grade B:
- Meets the electrical specification but is oversized on current or VA, or splits the primary differently (single 230 V against dual 115 V).
Every match here is electrical. Pin spacing and body size were not compared, so check the footprint against the datasheet above before you commit to a substitution. Send us the incumbent part number and we will confirm the mechanical fit with the quote.
Other secondaries on this datasheet
Same EI48 core, same 10 VA rating, same footprint — only the secondary winding changes.
- ASL160106BO6 V at 1,666 mA
- ASL160108BO7.5 V at 1,332 mA
- ASL160109BO9 V at 1,111 mA
- ASL160112BO12 V at 833 mA
- ASL160115BO15 V at 666 mA
- ASL160124BO24 V at 416 mA
- ASL160206BO2 × 6 V at 2 × 833 mA
- ASL160208BO2 × 7.5 V at 2 × 666 mA
- ASL160209BO2 × 9 V at 2 × 555 mA
- ASL160212BO2 × 12 V at 2 × 416 mA
- ASL160215BO2 × 15 V at 2 × 333 mA
- ASL160218BO2 × 18 V at 2 × 277 mA
- ASL160224BO2 × 24 V at 2 × 208 mA
Next step
Quote ASL160118BO, or change it
Each route below arrives with this part number and PCB Mount Transformers already attached.
Quote or custom wind
Pricing at your volume for this part, or the same transformer with a different secondary, cover, or footprint.
Request a quoteCross-reference
Replacing a Hammond, Triad, Signal, Tamura, Pulse, or Delevan part? Send the part number and we confirm the fit.
Cross-reference a partSamples
Qualifying this part before you commit to a build? Samples are $50, shipping in about two weeks.
Request samples